Das JB-103 Messing-Vierkant-Kistenscharnier ist mit einem eingebauten Anschlag ausgestattet, der es einem Deckel ermöglicht, bei 95° geöffnet zu bleiben. Es ist aus schwerem Messingmaterial gefräst und kann verwendet werden, wenn eine zusätzliche Strebe nicht erwünscht ist. Jedes Blatt misst 32 mm x 16 mm.
JB-103 Kistenscharnier – für unsichtbaren Anschlag – 95° – 32x16mm
€45,15 incl. VAT
Packung enthält ein Paar Scharniere mit Schrauben
Verfügbarkeit: Vorrätig (kann nachbestellt werden)
Share your thoughts!
Let us know what you think...
What others are saying
Das könnte dir auch gefallen …
Stopp-ScharniereJB-102 Kistenscharnier für unsichtbaren Anschlag – 95° – 32x13mm
€42,31 incl. VAT In den Warenkorb- Stopp-Scharniere
JB-107 Kistenscharnier – für unsichtbaren Anschlag – 95° – 51x22mm
€77,59 incl. VAT In den Warenkorb
Ähnliche Produkte
- Stopp-Scharniere
JB-101 Kistenscharnier – für unsichtbaren Anschlag – 95° – 19x13mm
€40,91 incl. VAT In den Warenkorb - Stopp-Scharniere
JB-804 Kistenscharnier für unsichtbaren Anschlag – 95° – 32mm lang
€49,36 incl. VAT In den Warenkorb
Mike Smith (Verifizierter Besitzer) –
The hinges are excellent quality. I usually replace the screws with square drive after pre-drilling , etc. Your web site installation instructions could use some review. You might look at the ones on Lee Valley for installing knife hinges. A picture is worth a lot of words. I always mortise slightly deeper than the thickness of the leaf. If not, you’ll have a small gap between the box lid and the case. This is an example of info not included in yur instructions.
(0) (0) Watch Unwatch
chip (Verifizierter Besitzer) –
as an amateur wood crafter, getting advice about your products from a pro. proved to be right-on. I will continue to use Brusso, the best hard ware on the market. I will replace the screws with square drive in the future.
(0) (0) Watch Unwatch
Anonymous (Verifizierter Besitzer) –
These hinges are perfect for small boxes. I have used cheaper hinges in the past, and they have caused me a lot of trouble. These precision made hinges are worth every penny. Some reviews have complained about the screws, but I had no trouble with them. I just drilled the correct size holes.
(0) (0) Watch Unwatch
Jerry Hindan (Verifizierter Besitzer) –
I purchased two sets of 103’s for keepsake boxes I am making for my grandchildren. I compared the Brusso with other hinges at Woodcraft and Rockler. There is simply no comparison, these are the best hinges on the market.
The installation instructions are not that good. For the price you pay for the hinges there should be better instructions; with and without the templates. I did a test piece with a handmade jig dowloaded from Fine Woodworking. i could not get a perfect cut. i purchased the templates and the installation was precise. You have to be careful even with the templates, they have to be perfectly aligned before routing. I also had to trim down the bushing to match the template. Brusso should offer a bushing that will work with their templates.
All in all….I would purchase any product from Brusso, along wth the templates to make the installation perfect.
Thanks Brusso.
(0) (0) Watch Unwatch
Ed (Verifizierter Besitzer) –
I’ve used these many times on the small boxes I make, they’re the best I’ve found. Substantial and no slop.
(0) (0) Watch Unwatch
Timothy R. Dixon (Verifizierter Besitzer) –
Perfect for my use,
purchased Jigs to go along with hinges and the hinges fit perfectly, now if I could just route square corners
(0) (0) Watch Unwatch
Jack (Verifizierter Besitzer) –
These hinges are top quality and arrived quickly
(0) (0) Watch Unwatch
Anonymous (Verifizierter Besitzer) –
Use the available template to cut the mortises with, otherwise you will have a sloppy (probably loose) install. The template is a little expensive but you can not do a proper install without it. I used a single template but two might be a little faster. Make sure you maintain the relative positions of the mortise when cutting the remaining mortises. I used clamps to make sure there was no movement of the two pieces. Do NOT cut the mortise deeper than the hinge leaf depth.
(0) (0) Watch Unwatch
Sergey (Verifizierter Besitzer) –
Very good quality
(0) (0) Watch Unwatch
Ron Carr (Verifizierter Besitzer) –
I have used the JB103 hinges on at least 35 small jewelry boxes over the years. They are perfect for supporting the lid when open. I have built a jig to hold the top and back flush, then clamp a pair of templates between the two piece. Accurate and perfect fit mortises every time. They are the Best Hinges Available, and have been for years.
(0) (0) Watch Unwatch
Matt (Verifizierter Besitzer) –
I was very pleased with these hinges. I work as a cabinet maker so I don’t have a lot of experience with small hardware like this and was nervous about hinging a small decorative box I needed to make. These hinges are amazing quality and look great. I do recommend getting the template along with them and following their instructions although I am sure with a scrap piece of .5″ MDF and some time you could make your own routing template too. Vary happy with how these work and look and wish I could attach pictures to this review
(0) (0) Watch Unwatch
Patrick Healey (Verifizierter Besitzer) –
Excellent product. Worth its high price for items that you want to be heirlooms.
(0) (0) Watch Unwatch
Lennis (Verifizierter Besitzer) –
One of the best hinges I’ve used! Very well made.
(0) (0) Watch Unwatch
Anonymous (Verifizierter Besitzer) –
Everything was well engineered and very accurate
(0) (0) Watch Unwatch
Bob Celli (Verifizierter Besitzer) –
These hinges are the best out there. Quality and precision. I have used them for years and will continue to do so.
(0) (0) Watch Unwatch
David King (Verifizierter Besitzer) –
Finest hinge I have ever put on a box. I am very pleased with them. I would very much prefer slotted screws, though. I did not use the cheap looking Phillips screws and had to order a whole box of slotted from McMaster-Carr. At least offer slotted as an option or upgrade. Thanks–
(0) (0) Watch Unwatch
Larry Burden (Verifizierter Besitzer) –
Absolutely, without a doubt, Brusso makes the best hinges money can buy. The majority of our boxes use the JB-103 hinges, but I would not hesitate to buy another size or different type of hinge or product from Brusso.
When Quality matters, buy Brusso!
(0) (0) Watch Unwatch
Anonymous (Verifizierter Besitzer) –
Very good quality, fairly priced
(0) (0) Watch Unwatch
Peter Archibald (Verifizierter Besitzer) –
Like all Brusso hardware this hinge adds that touch of distinction to my box work
(0) (0) Watch Unwatch
Bob Steimel (Verifizierter Besitzer) –
Very easy to install and looks great in the wooden box.
(0) (0) Watch Unwatch
GaryRudolf (Verifizierter Besitzer) –
When doing fine woodworking Brusso hinges are my choice.
(0) (0) Watch Unwatch
Red Lindholm (Verifizierter Besitzer) –
I only use Brusso products, period! I have never had an issue with anything I have used manufactured by them. Yes they are more expensive, but you are getting made in America products and you are getting a solid, sturdy, and worthwhile product. 100% satisfied
(0) (0) Watch Unwatch
neil meyer (Verifizierter Besitzer) –
Still waiting on my first hinge, that was sent USPS in N.J. building that collapsed.
(0) (0) Watch Unwatch
Casey Hoy (Verifizierter Besitzer) –
Greatest hinges i’ve ever used. You will not find a higher quality hinge.
(0) (0) Watch Unwatch