Het HD-638 messing kwadrantscharnier is ontworpen met een ingebouwde stop waardoor een deksel onder 95° open kan blijven. De boog wordt in de zijkant van de doos, onder het blad, geboord. Elk blad meet 25 mm x 25 mm.
Let op: Bij het monteren van de schakel gaat het uiteinde met een langere dogleg in de bovenzijde (deksel)zijde.
Anoniem (geverifieerde eigenaar) –
I tried an inexpensive quadrant hinge that tore itself apart the first time I opened the box………….. never again. These did the job and added class to the project
(0) (0) Watch Unwatch
john a dixon (geverifieerde eigenaar) –
very nice. only issue was the supplied brass screws were too long so wound up buying shorter ones.
(0) (0) Watch Unwatch
PAwoodworking (geverifieerde eigenaar) –
Nice looking hinge. I purchased two jigs to assure accurate installation.
Routed, added slots for stop link and assembled box. Looks good, BUT on one of the hinges the stop link will come out of the hinge leaf and hang loose – I have to work it back in – don’t know why this is happening, but maybe the mfr. needs to review the design.
I’m a bit disappointed – what with the price asked and having to buy the jigs – I expected more.
Rob
*RESPONSE FROM BRUSSO*
Rob, It’s likely that the looseness you describe is because the link was installed upside down. We have updated the installation instructions on our website to explain the proper installation method.
(0) (0) Watch Unwatch
Keith Cheveralls, Whitingham. Vt (geverifieerde eigenaar) –
Extremely well made and excellent quality finish. Unless you are highly skilled at fitting quadrant hinges strongly recommend using the appropriate jig available from Brusso.
(0) (0) Watch Unwatch
Michael (geverifieerde eigenaar) –
I have found that this quadrant hinge, along with all of the other Brusso products to be of the finest quality and workmanship. That said, this particular hinge could use a slight design change to make it better. I’m referring to the distance between the hinge stay mortise and the screw mounting hole. This distance is a bit too narrow, which creates a weak point between the screw mounting hole and the hinge stay mortise. I hope Brusso makes this slight design adjustment.
(0) (0) Watch Unwatch
David Thomas (geverifieerde eigenaar) –
I can’t imagine spending all of the time making your project and then use a lesser quality piece of hardware. Brusso’s hardware is stout, well made and consistent.
(0) (0) Watch Unwatch
Bill Brooks (geverifieerde eigenaar) –
Very nice hinges for medium to large boxes. My first use was on a humidor. I tried to get the fit correctly using only a drill bit and chisels. While getting close on practice pieces of poplar, I could never get it “just right”. I purchased the router template ( TJ-638) and everything worked perfectly this first time.
Take care to read and follow the routing instructions and you will be very pleased with the results.
(0) (0) Watch Unwatch
Clayton (geverifieerde eigenaar) –
The hardware is beautiful and has some meat to it. I would buy this hardware again but I would not use the included “steel'” screw to pre tap the holes. My only gripe is that I drilled, pre threaded the hole and waxed the “steel” screw and the thing still twisted off leaving half the screw in the wood. The brass screws gave me no issue with the same process. The brass templates are definitely worth it. Just make sure you get your router deck and guide bushing centered over the router bit.
(0) (0) Watch Unwatch
Mike Mingioni (geverifieerde eigenaar) –
Worked as expected. Wish there was an insert for the mortise. With the guild bushing on my router I can’t see the cut. Mortise was free handed, and while it wasn’t difficult at this price they should do better there.
(0) (0) Watch Unwatch
Anthony H (geverifieerde eigenaar) –
I have been using these Quadrant Hinges for high end Jewelry Boxes for twenty years. They are reasonably easy to fit ( I don’t use the template ) .
(0) (0) Watch Unwatch
Bruce (geverifieerde eigenaar) –
These hinges were the real deal and provide a classic look to the commemorative urn box I used them on. I ordered less expensive hinges somewhere else and they were thin material compared to these hefty hinges. I just wish Brusso made a half-mortised lock to go with them. I ended up polishing the lock I got on the other web site.
(0) (0) Watch Unwatch
Anoniem (geverifieerde eigenaar) –
Must be very accurate, hinge stops difficult to router out and still have space for screws to attach to box being made
(0) (0) Watch Unwatch
Don Johnston (geverifieerde eigenaar) –
Lovely product good finish
(0) (0) Watch Unwatch