L-23 Draaischarnier

33,80 incl. VAT

Pkg bevat een paar scharnieren met schroeven

Beschikbaarheid: Slechts 1 resterend op voorraad (kan nabesteld worden)

Artikelnummer: L-23 Categorie:

De L-23 messing offset pivot scharnier wordt gebruikt wanneer een minimum aan zichtbaar hang- en sluitwerk gewenst is of wanneer de deur vrij van het kozijn moet kunnen draaien. Het is boven en onder in de deur en het kozijn ingegroefd; alleen de spil is zichtbaar. Het blad meet 35 mm x 8 mm x 3 mm.

Share your thoughts!

Let us know what you think...

What others are saying

  1. Donald DeDobbeleer

    Invest in some QUALITY screws

    Donald DeDobbeleer (geverifieerde eigenaar)

    I’ve used Brusso hinges for many years. After several broken brass screws I started using a steel screw to pre-thread the holes. I was happy to see brusso start to supply 1. Why they decided to use a slot headed screw is incomprehensible. The brass screws you supply are inferior and are most likely from India, known for their inconsistent quality. Have you given any thought to a 1/2 round end to the long leg of your hinges? That would help the 90% of your customers who set your hinges using a router bit.
    **Response from Brusso Hardware**
    Thanks for your feedback, Donald. I understand your concern about brass screws. We’ve found that regardless the source of the screw, small brass screws have inherit issues given their small size and the soft nature of brass. For our tips regarding screw installation/removal see our screw documentation here: http://www.brusso.com/screw-documentation/
    In regards, to adding a radius to the knife hinge I will pass that information along. Again, thanks for the customer feedback and for choosing Brusso Hardware. -Kevin

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Bela Hackman

    Excellent as expected.

    Bela Hackman (geverifieerde eigenaar)

    As I’ve said about other knife hinges in Brusso’s line, their precision, finish and function are just outstanding.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Ofer Sutton

    Offset Pivot review

    Ofer Sutton (geverifieerde eigenaar)

    Te quality is excellent, delivery time was fast and good.
    It will help if 1 or 2 extra screws will be shipped with each pair of hinges.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. John Rieger

    Solid and well crafted

    John Rieger (geverifieerde eigenaar)

    Stout and finely crafted. Hinge pin fits snug with no gap square and flat. Fit mortise snugly. No doubt about the quality and performance

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Larry

    Excellent finishing touch on my project.

    Larry (geverifieerde eigenaar)

    I’m very impressed with the high quality of this set of hinges. I’ll be going back to Brusso for hinges and latches on future projects.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Anoniem

    excellent

    Anoniem (geverifieerde eigenaar)

    needed the installaTION instructiions which were offered as an extra after purchase too late

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Anoniem

    Perfect!

    Anoniem (geverifieerde eigenaar)

    These hinges are like little works of jewelry art. They are perfect. I know there have been some concerns about the brass screws being soft. My only comment is that I didn’t find the single slotted steel screw to be helpful — a proper pilot hole is all you need.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Dragana

    The screws are bad

    Dragana (geverifieerde eigenaar)

    The hinge itself is good but the screws are terrible, even the steel one. One of them broke inside so I had to get it out, but in general all the heads were stripped. Yes I predrilled, applied wax, used the right bit and used the steel screw first.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Reed Hopkins

    L-23 pivot hinge

    Reed Hopkins (geverifieerde eigenaar)

    Was shipped quickly; matched description; works fine.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Peter Brocklehurst

    L- 23

    Peter Brocklehurst (geverifieerde eigenaar)

    Brusso good service. USPS service very poor. Delivery took 10 weeks.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Inloggen

Registreren

Een link om een nieuw wachtwoord in te stellen zal naar je e-mailadres worden verzonden.

Selecteer alle manieren waarop je van ons wil horen

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacybeleid.

Continue as a Guest

Don't have an account? Sign Up

Andere suggesties…